As we all known,linear guide rail is the use of ball rolling mechanism, in the process of operation, if the ball drop ,there will have a great impact on the accuracy and life of the equipment.In order to prevent the PYG linear rail ball drop of the linear guide rail, the following preventive measures can be taken:
1.Install the equipment properly: The slider rails must be properly aligned and pre-tightened to ensure that the slide rails and key components are tightly connected to avoid ball dropping due to improper assembly.
2.Rugular cleaning and maintenance: Usually, after the linear guide is used for a long time, the surface will produce some dirt and other impurities, which may affect the normal operation of the ball. Therefore, the guide rail needs to be cleaned and maintained regularly to ensure the smooth operation of the guide rail.
3.Check the margin regularly: The lm guide will consider the ball margin in the design, if the ball margin is too small, it will increase the risk of ball falling off. Therefore, it is necessary to check the ball allowance regularly to ensure that there is no excessive squeezing or excessive relaxation.
4.Avoid the impact of strong external forces: During use, to avoid the impact of strong external forces on the linear guide rail, especially when the guide rail is not equipped with products, more care should be taken to avoid causing the ball to fall. In short, in order to prevent the ball drop of the linear guide rail, it is necessary to take appropriate measures, and do regular inspections and maintenance to ensure the smooth operation of the equipment in the long run.
If you have any other questions,please don't heasitate to contact us, our professional customer service will give a reply in time!!!
Welcome to inquiry!!!
Post time: Oct-20-2023