PQR Taxanaha toosan ee nidaamka tareenada slide slider ah hagaha toosan ugu fiican ee cnc Sawirka Featured

Taxanaha PQR ee nidaamka tareenada slide slider toosan hagaha ugu fiican ee cnc

Sharaxaad Gaaban:

La mid ah hagayaasha toosan ee nooca rullalulayta ah marka laga reebo qaadista culayska sare ee jihooyinka oo dhan iyo qallafsanaan sare, iyo sidoo kale qaadashada SynchMotion^TMXidhiidhiyaha tignoolajiyada, waxa uu yarayn karaa qaylada, iska caabbinta is jiid jiidka, wanaajin kara hawlgalka oo sii dheerayn kara nolosha adeegga.Markaa taxanaha PQR waxay leeyihiin codsiyo warshadeed oo ballaadhan, oo ku habboon warshadaha kuwaas oo u baahan xawaare sare, aamusnaan iyo qallafsanaan sare.

Nooca Model:PQR

Cabbirka:30, 35, 45,55,65

Qalabka tareenka:S55C

Qalabka xannibaadda:20 CRmo

Tusaale:la heli karo

Waqtiga dirida:5-15 maalmood

Heerka saxda ah:C, H, P, SP, UP

Email noogu soo dir Whatsapp

Faahfaahinta Alaabta

Tags Product

Qeexida PQR Isku toosinta Xadiidka Tooska ah

Tilmaamaha Taxanaha PQR

xidho adkaysi u adkaysta / culayska sareeyo / sanqadh hooseeya

twill gaar ah oo loogu talagalay qaadista tareenka toosan

calaamad xardho cad, model kubad hagaha toosan

tilmaamo dhamaystiran

Faa'iidada Taxanaha PQR ee Xadiidka Tooska ah ee ugu Fiican

1. Heerka wadista waa la dhimay, sababtoo ah jilitaanka dhaqdhaqaaqa tareenka ee toosan waa yar yahay, ilaa iyo inta ay jirto awood yar ayaa ka dhigi karta mashiinka dhaqaaqa, heerka darawalnimada waa la dhimay, kulaylka ka yimaada is-jiidashadu wuxuu ku habboon yahay xawaaraha sare. , dhaqdhaqaaq bilow iyo rogaal celin joogto ah.
2. Saxnaanta ficilka sare, dhaqdhaqaaqa xadiidka hagaha toosan ayaa lagu gaaraa is-rog-rogid, ma aha oo kaliya isku-xidhka isku-xidhka ayaa la dhimay hal-konton ee hagaha silbashada, laakiin sidoo kale farqiga u dhexeeya iska caabbinta dhaqdhaqaaqa dhaqdhaqaaqa firfircoon wuxuu noqon doonaa mid aad u yar, sidaas darteed. sida loo gaaro dhaqdhaqaaq xasiloon, la yareeyo shoogga iyo gariirka, waxay gaari kartaa meelaynta, taas oo ku habboon hagaajinta xawaaraha jawaabta iyo dareenka nidaamka CNC.
3. Qaab dhismeedka fudud, rakibaadda fudud, isdhaafsiga sare, cabbirka xadiidka hagaha toosan ayaa lagu hayn karaa gudaha xadka qaraabada, qaladka daloolka dhejiska ee dhejiska dhejiska waa yar yahay, fududahay in la beddelo, ku rakib giraanta saliidda duridda ee slider, karo Saliida si toos ah u bixisa, sidoo kale waxaa lagu xiri karaa tuubada saliidda ee saliidda tooska ah, si khasaaraha mashiinka loo yareeyo, wuxuu sii wadi karaa shaqada saxda ah ee saxda ah muddo dheer.

PYG^®Tiknoolajiyadu waxay urursatay tignoolajiyada sannado badan oo waayo-aragnimo ah, hagayaasheeda toosanna waxay leeyihiinsax sare iyo qallafsanaan xoog leh, kaas oo si fudud u bedeli kara alaabta la midka ah ee Japan, Kuuriya iyo Bay.

Dhaqdhaqaaq toosan oo ku habboon

Hagaha LM, oo sidoo kale loo yaqaan hagaha dhaqaaqa toosan ama hagaha, waa badeecad kacaan ah oo loogu talagalay in lagu bixiyo dhaqdhaqaaq toosan oo toosan oo aan toos ahayn oo tiro badan oo codsiyo ah.Iyada oo leh waxqabadkeeda sare iyo adkeysiga gaarka ah, tignoolajiyadan casriga ah ayaa wax ka beddelaysa warshadaha adduunka oo dhan.

Tilmaamaha LM waxaa loogu talagalay dhaqaaq toosan oo toosan, taasoo ka dhigaysa mid ku habboon noocyo badan oo kala duwan oo ah nidaamyada otomatiga warshadaha.Haddi ay ahaan lahayd robotics-ka, qalabka semiconductor, ama mishiinada caafimaadka, xadiidku waxa uu xaqiijiyaa dhaqaaqa siman iyo meelaynta saxda ah, hagaajinta hufnaanta hawleed iyo wax soo saarka.

Iyada oo nashqaddeeda is haysta iyo awoodda culeyska sare leh, LM hagaha ayaa aad ugu sarreeya u adkeysiga culeysyada culus iyo xaaladaha qallafsan ee daran.Dhismaheeda sare iyo agabka tayada sare leh waxay xaqiijinayaan waxqabadka muddada dheer iyo shuruudaha dayactirka ugu yar, yaraynta wakhtiga hoos u dhaca iyo lumitaanka wax soo saarka.

Faa'iidada sliders

1. Qaybahayaga hagaha tooska ah waxay ku qalabaysan yihiin gooyo ku habboon si loo yareeyo khilaafka oo looga hortago in kubbadaha birta ah ay dhacaan, si loo hubiyo in mashiinku u shaqeyn karo ammaan iyo xasilloon,

2. Xaaladaha gaarka ah ee shaqada, boodhadhkayaga ayaa sidoo kale lagu samayn karaa heerkul sare iyo qaababka u adkaysta daxalka;

3. sliders-yadayadu waa kuwo is-beddeli kara,Haddii aad kaliya u baahan tahay inaad beddesho slider-ka, noo sheeg cabbirka aad u baahan tahay si fiican ayaan kuugu habboonayn karnaa.

Noocyada xannibaadda:

Waxaa jira laba nooc oo xannibaad ah: flange iyo square, nooca flange wuxuu ku habboon yahay codsiga culeyska culus ee daqiiqada sababtoo ah dhererka hoose ee golaha iyo dusha sare ee ballaaran.

Agab ku filan

Waxaan xaqiijin karnaa gaarsiinta waqtiga iyo shuruudaha waaweyn ee gawaarida kubbadda qaada iyo biraha hagaha.

Adeeg heer sare ah

Waxaan bixinaa iibka hore ee xirfadleyda, iibka, adeegga iibka ka dib iyo la-talinta tignoolajiyada.

Cabirka

Cabirka taxanaha PQR

Qaabka	Cabirka Golaha (mm)		Cabbirka xannibaadda (mm)				Cabirka Tareenka (mm)					Koritaanka cabbirka boodhkatareenka	Qiimaynta culeyska firfircoon ee aasaasiga ah	Qiimaynta culeyska aasaasiga ah ee taagan	miisaanka
															Block	Tareen
	H	N	W	B	C	L	W_R	H_R	D	P	E	mm	C (kN)	C0 (kN)	kg	Kg/m
PQRH20CA	34	12	44	32	36	86	20	21	9.5	30	20	M5*20	26.3	38.9	0.4	2.76
PQRH25CA	40	12.5	48	35	35	97.9	23	23.6	11	30	20	M6*20	38.5	54.4	0.6	3.08
PQRH25HA					50	112.9							44.7	65.3	0.74	3.08
PQRH30CA	45	16	60	40	40	109.8	28	28	14	40	20	M8*25	51.5	73.0	0.89	4.41
PQRH30HA					60	131.8							64.7	95.8	1.15	4.41
PQRH35CA	55	18	70	50	50	124	34	30.2	14	40	20	M8*25	77	94.7	1.56	6.06
PQRH35HA					72	151.5							95.7	126.3	2.04	6.06
PQRH45CA	70	20.5	86	60	60	153.2	45	38	20	52.5	22.5	M12*35	123.2	156.4	3.16	9.97
PQRH45HA					80	187							150.8	208.6	4.1	9.97

Qaabka	Cabirka Golaha (mm)		Cabbirka xannibaadda (mm)				Cabirka Tareenka (mm)					Koritaanka cabbirka boodhkatareenka	Qiimaynta culeyska firfircoon ee aasaasiga ah	Qiimaynta culeyska aasaasiga ah ee taagan	miisaanka
															Block	Tareen
	H	N	W	B	C	L	W_R	H_R	D	P	E	mm	C (kN)	C0 (kN)	kg	Kg/m
PQRL20CA	30	12	44	32	36	86	20	21	9.5	30	20	M5*20	26.3	38.9	0.32	2.76
PQRL25CA	36	12.5	48	35	35	97.9	23	23.6	11	30	20	M6*20	38.5	54.4	0.5	3.08
PQRL25HA					50	112.9							44.7	65.3	0.62	3.08
PQRL30CA	42	16	60	40	40	109.8	28	28	14	40	20	M8*25	51.5	73.0	0.79	4.41
PQRL30HA					60	131.8							64.7	95.8	1.02	4.41
PQRL35CA	48	18	70	50	50	124	34	30.2	14	40	20	M8*25	77	94.7	1.26	6.06
PQRL35HA					72	151.5							95.7	126.3	1.63	6.06
PQRL45CA	60	20.5	86	60	60	153.2	45	38	20	52.5	22.5	M12*35	123.2	156.4	2.45	9.97
PQRL45HA					80	187							150.8	208.6	3.17	9.97

Qaabka	Cabirka Golaha (mm)		Cabbirka xannibaadda (mm)				Cabirka Tareenka (mm)					Koritaanka cabbirka boodhkatareenka	Qiimaynta culeyska firfircoon ee aasaasiga ah	Qiimaynta culeyska aasaasiga ah ee taagan	miisaanka
															Block	Tareen
	H	N	W	B	C	L	W_R	H_R	D	P	E	mm	C (kN)	C0 (kN)	kg	Kg/m
PQRW20CC	30	21.5	63	53	40	86	20	21	9.5	30	20	M5*20	26.3	38.9	0.47	2.76
PQRW25CC	36	23.5	70	57	45	97.9	23	23.6	11	30	20	M6*20	38.5	54.4	0.71	3.08
PQRW25HC					45	112.9							44.7	65.3	0.9	3.08
PQRW30CC	42	31	90	72	52	109.8	28	28	14	40	20	M8*25	51.5	73.0	1.15	4.41
PQRW30HC					52	131.8							64.7	95.8	1.51	4.41
PQRW35CC	48	33	100	82	62	124	34	30.2	14	40	20	M8*25	77	94.7	1.74	6.06
PQRW35HC					62	151.5							95.7	126.3	2.38	6.06
PQRW45CC	60	37.5	120	100	80	153.2	45	38	20	52.5	22.5	M12*35	123.2	156.4	3.41	9.97
PQRW45HC					80	187							150.8	208.6	4.54	9.97